This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

What next in the boiler room?

25 April 2013

How can you achieve further energy savings even when your BMS, boiler and other heating controls have beenoptimised? Tony Willis explains how

Many FMs have been tasked with the need to reduce the cost and environmental impact of energy consumption, and may have already implemented a number of measures to help reduce the energy consumption of their boiler plant.

Obvious examples include ensuring the boilers are maintained regularly and perhaps installing automatic meters to help keep track of energy consumption. Other sensible measures would include checking that the BMS is optimised and, if it wasn’t already in place, introducing boiler sequencing and weather compensation strategies.

However, further savings can be achieved by optimising each individual boiler to eliminate boiler dry-cycling,which can potentially deliver additional savings of 10-25% (depending on site and application) with payback typically less than 2 years. These levels of savings can be achieved over and above those being delivered by existing control strategies. So when it comes to fine-tuning energy performance boiler load optimisation is the next logical step.

Boiler dry cycling occurs within each individual boiler, whereas most control strategies are focused on the overall performance of the collective boiler plant. For example, in a commercial boiler room with two or more boilers a BMS will generally control heating and hot water systems by monitoring the blended water temperatures from all of the boilers and responding accordingly. It generally won’t be monitoring the boilers individually or fine tuning each boiler load.

This is where wasted energy occurs and goes unnoticed. Once the heating system is satisfied the boiler or boilers will naturally begin to cool down.Once the temperature has dropped below the setting on the boiler’s thermostat (or as set by the BMS) theboiler will fire to recover this heat loss. This is boiler dry cycling – the boilers are only firing to recover their own heat loss; there is no actual heating demand from the building. If boiler dry cycling is prevented, significant cost savings and carbon emissions reductions can be achieved.

These issues have been recognised for many years but early attempts to tackle boiler dry cycling (some of which have re-emerged) relied on creating a delay between firing cycles or artificially lowering the boiler’s set point. These strategies have the potential to conflict with existing controls and compromise comfort conditions in the building – without delivering appreciable savings.

Sabien’s patented M2G boiler load optimisation technology uses adaptive software. It analyses each boiler’s flow and return temperatures every 10 seconds, and measures the decay of the flow and return temperature every second to provide a true load profile of each individual boiler in real time.

Just as importantly, it recalculates the values every time the boiler reaches its required set point temperature, so it adapts to BMS/optimiser variable set-points and does nothing to conflict with other existing controls such as weather compensation, demand control or sequencing. The boilers’ designed set points are not altered. Importantly M2G does not require any calibration or maintenance.

The result is that the M2G will enable you to deliver additional savings and carbon emissions which are currently going unnoticed in your boiler room.

For further information visit

Contact Details and Archive...

Print this page | E-mail this page


View more articles
Article image

Steinel boosts light output of its solar-powered, sensor-controlled outdoor light

Lighting expert, Steinel (UK) has increased the light output of its ultra-bright XSolar range of solar-powered external lights, now providing 150 lumens of... launches to put energy savings in spotlight

A website has been launched for Commulite, a UK manufacturer of LED communal and emergency lightings systems...


View more articles
Article image

Why the Law Says You Need a Nappy Bin Disposal Service

At home, parents are used to disposing of their babies’ used nappies the same way they do any other domestic waste - bagging it up and sticking it in the r...
Article image

A High Performance Service for a High Performance Business – GKN Aerospace

GKN Aerospace, a first tier supplier of highly complex composite and metallic aerostructures and engine products to the global aviation industry, recently ...
Article image

Making the Leadenhall Building fit for purpose

Firmly established as one of the most notable buildings in the City of London, the Leadenhall Building (informally known as the cheesegrater) provides a st...

Benchmarking maintenance

BSRIA has just published this year's operation and maintenance benchmarking report as a guide for building operators to evaluate their performance against ...
Article image

Center Parcs goes cashless with Systopia

Systopia, which deals with cashless payment systems, has secured a contract with UK Short Break Operator Center Parcs to provide cashless payment systems i...
Article image

Rinnai’s H3 Hydrogen/BioLPG Hybrid Heat Pump

Rinnai now offers H1, H2 & H3 solutions to the energy question in the cost of living squeeze....