This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Apollo series sets new PAT standards

22 October 2014

Seaward’s latest generation portable appliance testers establish a new approach to electrical safety testing. The Apollo 600 brings new features to extend the capability and performance of the previous Seaward PrimeTest 350 PAT tester and is complemented by the new Apollo 500, introduced as the successor to the Seaward Europa.

Both the new Apollo testers, alongside the latest PATGuard 3 test data management software, are designed to comply with the latest best practice advice on maintaining a risk based approach to maintaining workplace safety.

Leading the new range is the Apollo 600, a multi-purpose PAT tester with an on board digital camera to capture images for inclusion in risk and inspection records; when used with PATGuard 3 software it provides unrivalled results management including photographs for visual evidence.

The Apollo 500 has the same range of PAT tests as the Apollo 600, but does not include a camera, and is designed for dedicated plug and play electrical testing, both testers incorporate all of the safety tests recommended by the latest IET Code of Practice, including for permanently connected and 3 phase electrical equipment.

The Apollo series testers include all of the electrical safety tests required by the IET Code of Practice including, earth continuity, insulation resistance at 250V or 500V, protective conductor current, touch current, IEC lead polarity and portable RCD trip time, without the risk of tripping the installation RCD.

In addition to testing plug in appliances, the Apollo is fully equipped to test permanently connected and 3 phase electrical equipment as required by the new Code of Practice.

The new Apollo testers can be used with battery or mains power and include a built-in risk assessment tool and suggested re-test interval calculator and for easy results storage, Bluetooth and USB connections are included as well as the ability to transfer data remotely using a mobile phone or tablet.

A range of compatible accessory bundles including printers, labels, barcode scanners and PATGuard 3 software are also available.


Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Why the Law Says You Need a Nappy Bin Disposal Service

At home, parents are used to disposing of their babies’ used nappies the same way they do any other domestic waste - bagging it up and sticking it in the rubbish for general collection.Full Story...

Article image Britannia Hotel Group Fly the Nilfisk Flag

Founded in 1976 the Britannia Hotel Group now incorporates 53 hotels and provides over 10,000 bedrooms across the UK.Full Story...

Importance of compliance further confirmed by recent asbestos cases

Pay rises agreed for building services workers

Investigation set to begin into Carillion failure as last contract transfers to new provider

http://www.fsifm.comhttps://www.abm.co.uk/https://www.emergencyuk.com/pfmb18