This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Weber floor screed keeps everyone on their toes at Everyone Active leisure centre

31 October 2018

In the first phase of improvements to Watford Woodside Leisure Centre in Hertfordshire, one of two state-of-the-art facilities in the town managed by Everyone Active, high performance weberfloor 4310 fibre flow by Saint-Gobain Weber has been specified by main contractor Bosun Design & Construction Limited (BDC), Chandlers Ford, Hampshire.

Everyone Active is the trading name for Sports & Leisure Management Limited (SLM), the UK’s longest-established leisure contractor. It manages more than 170 leisure and cultural facilities around the country in partnership with 49 different local authorities and trusts, and is currently carrying out a £1.8million improvement project across its Watford Woodside and Watford Central leisure centres.

“Working alongside Watford Borough Council, we are supporting local people of all ages and abilities to improve their health by offering them access to top-class leisure services and facilities,” said Gary Foley, Everyone Active’s contract manger in Watford.

“This project to update both locations will make a huge difference to our members, providing them with a new fitness studio to cater for the growing demand in group exercise, refurbished changing facilities and a significantly improved fitness suite that will offer the latest state-of-the-art equipment.”

“We undertake contracts for Everyone Active at numerous sites in the south east,” comments James May, director at BDC, which is carrying out the work in Watford.

“Multiple contracts are on-going at any one time. The process of selection is via tender direct to Everyone Active, which then works with the local authority. It is at this stage a preferred contractor is proposed.”

Included in the current phase of the works is the creation of a new mezzanine floor. It has been installed in the space above a former dance studio and adjacent squash court, and has enabled a brand new fitness studio to be created.

The current studio has also been extended. The second phase of development is due to begin at both Watford sites shortly, for completion in early 2019.

BDC is actively involved in both projects. Subcontractor C E C Plastering, of Southampton, undertook the application of weberfloor 4310 fibre flow screed.

Director Chris Crosby says: “Together with Bosun Design & Construction we specified this fibre reinforced self-smoothing compound which we pump-applied at various thicknesses from 35-50mm.

"It was quick and easy to install, very versatile, and has produced an excellent finish. We’re fans of this product and have used it before but, even so, we benefited from Weber’s technical support.”

weberfloor 4310 fibre flow screed was applied to a steel framed block and beam floor construction which overcame the concerns around loading issues that might have arisen with the application of a traditional concrete screed.

The new floor was initially primed with weberfloor 4716, a water-based primer designed for use with all cementitious and hemi-hydrate floor screeds.

It regulates the porosity of the substrate, improves the adhesion of flooring products while reducing the formation of pinholes in the levelling layer.

It should be diluted with clean water and can be spray applied on large areas. weberfloor 4310 fibre flow screed is designed for application at thicknesses between 5 – 50mm and formulated from special cements, aggregates, supplementary binders and chemical admixtures.

It is supplied as a blended dry powder and designed specifically for renovation of existing floors and floating floor construction in domestic and commercial applications.

weberfloor 4310 fibre flow can receive foot traffic after just 2 - 4 hours and can be tiled after 12 - 24 hours, dependent on ambient temperature following installation.

The fibre reinforcement aids durability and allows it to be used in conjunction with under floor heating systems and floating floors.

weberfloor 4310 fibre flow has excellent spreading and smoothing characteristics. It has low alkalinity and low emissions during drying and is casein free.

Almost 500 bags of weberfloor 4310 fibre flow were required to finish the 190m² mezzanine floor in preparation for a final wood sprung floor suitable for dance and other physical education where shock absorption is essential to enhance performance and reduce the risk of injury.

weberfloor 4310 fibre flow is featured in Weber’s one hour long RIBA-Assessed ‘Introduction into Flowing Floor Screeds’ CPD which can be presented by Weber’s Specification Team at your premises or at a Saint-Gobain facility or Training Academy anywhere in the UK.

It is free of charge and available on request.

This comprehensive CPD presentation covers many subjects from why and where to use floor systems; the attributes of commercial floors; design considerations; the demands of the finished floor that will have an influence on specification, through to renovation, fast-track construction and drying times.

The CPD includes an application video showing the attributes of weberfloor 4310 fibre flow smoothing compound which is of specific interest to both designers and applicators.

Weber’s floor screeds and tile fixing products are manufactured in sustainable, modern manufacturing facilities in Bedfordshire, Shropshire and Ireland, ensuring product quality, conformity and availability, with reduced transportation costs and CO2 emissions.

Weber has a team of experienced technical advisors who are available to provide advice both at the specification stage and during application.

Detailed specifications can be provided for specific projects while site visits and on-site support can be arranged.


Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Winners of the PFM Awards 2018

Last night saw the the 25th anniversary of the PFM Partnership Awards, resulting in enthusiastic response throughout the evening and on a variety of social media platforms.Full Story...

Article image Finalists announced for the PFM Partnership Awards 2018

Official confirmation of this year’s list of finalists for the Partnership categories within the PFM Awards 2018 was announced on Friday on www.pfmawards.co.uk.Full Story...

Six experts reveal how to build a career in international FM

Why the Law Says You Need a Nappy Bin Disposal Service

Long-term, sustainable, FM service delivery

http://www.fsifm.comhttps://www.centricabusinesssolutions.com/performance?utm_source=PFM&utm_medium=Newsletter&utm_campaign=CHPhttps://www.daikinapplied.uk/service