This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Rinnai Solo - A specifier's and installer's flexible friend

09 February 2017

Infinity Solo condensing low NOX water heater is the first Rinnai product for the UK that combines the advanced technology of wall mounted continuous flow water heaters with a stainless-steel storage cylinder in one compact footprint.

When the product was first introduced Solo was adopted as a single installation product for light commercial operations such as small hotels and schools.

However, Rinnai is now seeing greater penetration as installers are beginning to use them in multiples on larger projects - one installer has utilised three units for a major school academy installation.

It seems the market is identifying other areas for the Solo, beyond the target market of new build and refurbishment housing projects, where it is proving its worth in larger three/four-bed dwellings where one can expect to find a family bathroom, ensuite and a downstairs cloakroom/shower.

The Rinnai Solo is a versatile product - it is renewables ready so the business/building owner or householder can very easily extend the system to make fuel savings by adding solar thermal later.

The 24kW-59.5kW Infinity Solo range is renewables compatible and supplied pre-fitted with a coil, meaning that the primary energy source can be renewable gains such as solar thermal, and the complementary Rinnai water heater will only apply the precise amount of gas to boost the difference in temperature.

Because the Solo cylinder is stainless steel it greatly reduces the weight compared to glass lined models, which makes transportation and installation much easier.

As well as the difference in weight, the cylinders available also boast extremely low heat loss figures (as low as 1.41kW/h day), which means the customer pays less to maintain the heat within the tank and the system when fitted to a renewable heat source maximises renewable gains.

Rinnai’s new Solo range incorporates 35kW and 54kW appliances, ensuring that even sites with a smaller gas meter can utilise its advanced technologies.

The larger Infinity Solo model will also act as a high-efficiency alternative to other forms of gas fired storage appliances.


Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Why the Law Says You Need a Nappy Bin Disposal Service

At home, parents are used to disposing of their babies’ used nappies the same way they do any other domestic waste - bagging it up and sticking it in the rubbish for general collection.Full Story...

Article image Competency in FM - part one

Competency in FM is a subject that is attracting attention in the industry and rightly so. Legislation and regulations put the duty to comply on a ‘competent person’ and, more often than not, there is no definition of competent.Full Story...

Partnership formed to support green business development

Former editors celebrate PFM Awards’ 25th anniversary

ESOS fines of nearly £160,000 announced

http://www.fsifm.comhttps://www.centricabusinesssolutions.com/performance/chp-education?utm_source=PFM&utm_medium=News%20letter%20banner&utm_campaign=CHPhttp://www.pfmawards.co.uk/https://www.daikinapplied.uk/servicehttps://www.ledvance.com/index.jsp