This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Disaster Connections – why designers should consider the worst that can happen.

29 September 2016

Traditionally, designers have not considered what happens if it all goes wrong. The concept that maintenance should happen as a matter of course and that maintenance will be preventative is often overlooked. The fact is, most companies only buy reactive maintenance, either through lack of knowledge or money, this can mean, when something goes wrong it is catastrophic.

As designers, our contribution to disaster planning is usually, ‘a twin head pump and a standby boiler is enough’, but what if the issue is more serious? Few designers analyse the single point failure elements to their design and even if they did, clients would be unwilling to pay for a more robust solution.

So what is the solution?

Designers should consider the provision for temporary boiler plant at the onset of their design. All that is required is a series of simple capped connection points for plant. These connection points will cost pence in initial installation and should the worst happen, the recovery strategy would not require new welded connections and hence could be delivered in hours and not days.

Temporary boiler companies can supply plant extremely fast, but precious time is lost because the plant room has no spare power provision or the system requires a tapping… or worse, the system needs a total plant room.

Every designer or system operator should consider a single point failure study, just to determine what may happen should something fail. Even if they do, we would recommend designing in a single connection point on the primary network and on each secondary network. Tackling primary and secondary enables parts of the system to be kept running if major changes to the primary network are needed. These connections should be line size with a valve and an end cap, they can also be used as a flushing or testing point in the future. Power provision should be provided ideally by way of commando plugs; a small temporary water supply will also be needed.

More practical elements can be easily incorporated during design stage, for example::

•Where would the plant go?
•Can a large vehicle get there?
•Would the flue cause a nuisance?
•How would hoses run into the building?

If simple connection points had been included in the design and a plan had been provided, Ideal heat can deliver the boiler and have heat on in hours, without connection points, it may take days. Can your business function without heat?

If you have any concerns, Ideal heat Solutions can survey your installation, arrange for the relevant connections and produce a plan with a unique reference number to make the process for emergency heat smooth and fast.

Author: Jamie Ross-Davies, Ideal Heat Solutions


Contact Details and Archive...

Print this page | E-mail this page


Article image Six experts reveal how to build a career in international FM

The International Facility Management Association’s (IFMA) UK Chapter and the Royal Institution of Chartered Surveyors (RICS) will kick-start Workplace Week London 2018.Full Story...

Article image Why the Law Says You Need a Nappy Bin Disposal Service

At home, parents are used to disposing of their babies’ used nappies the same way they do any other domestic waste - bagging it up and sticking it in the rubbish for general collection.Full Story...

Winners of the PFM Awards 2018

Long-term, sustainable, FM service delivery

Finalists announced for the PFM Partnership Awards 2018